Tough Nut Audio Footers Review
November 13, 2026 § Leave a comment
https://www.enjoythemusic.com/magazine/equipment/1026/Tough_Nut_Audio_Footers_Review.htm
The footers reviewed here are a spin-off category from the footers developed for their racks. I’ve championed this category for years, going back more than two decades to the first reviews of Stillpoints, Boston Audio Design, and Soundeck (then known as Sound Damped Steel). And I have a shoebox full of others, comprising various elastic materials, wood, ceramic, and steel balls, and concave retaining fixtures.

CH Precision P10 Reference Phono Preamplifier $154,000| REVIEW
November 12, 2026 § Leave a comment
https://pt.audio/2026/10/18/ch-precision-p10-reference
In other words, with my 1.52 ohm Atlas, an extra ohm or two of wiring is not a rounding error. It is a meaningful chunk of the total. Florian traced that parasitic resistance through the cartridge contacts, the tonearm wires, and the arm-to-P10 cable, and his advice was to keep the whole path “as low as possible when working in current mode, ideally under one Ohm.” To be clear, a continuous silver cable does not automatically guarantee a low resistance path. But fewer junctions means fewer places for resistance to hide. When I had my AXIOM built without the extra DIN and interconnect connections, I thought I was being a little obsessive. Nice to know there was an electrical reason for the obsession. If you are building a current mode front end, have the conversation with your tonearm maker before you order.


Heaven 11 Billie Amp Mk3 tube/class D hybrid integrated amplifier $2,995 Review
November 12, 2026 § Leave a comment
It is a distinct advantage in reviewing to have two configurable devices side by side. It only took a few minutes to unscrew the footers, lift the lid, swap the board, and close the unit. Kudos for Heaven 11 trusting in the basic competence of the audiophile community and not charging for return (or round trip) shipping and bench time for upgrades. A set of identical components, one with upgrades, offers close to real-time comparisons and chases away any uncertainty whether the upgrades are efficacious; operationally switching between the two units during playback took me about 15 seconds.
As the two Mk3 units were connected identically, the headphone comparison was the quickest I have done. Starting with the music playing through both units, I kept the volume down on them both to silence the mains and subwoofers, plugged the headset into one of the units, and brought up the volume. To switch, I lowered the volume, plugged the headphones into the other unit with the upgrade Performance Headphone Module ($150 if purchased separately, $99 when ordered pre-configured with the amp), and brought up its volume.

The Most Beautiful Car Amplifier Ever Made? Audison HR100 Review and Amp Dyno Test
November 12, 2026 § Leave a comment
The Hi-Fi News Listening Room
November 11, 2026 § Leave a comment
https://www.hifinews.com/content/test-page
All our treatments – the corner and Tri-Traps, absorption, diffusion and scattering panels – were built to specification by GIK Acoustics LLC in Leeds. GIK Acoustics was even able to colour match its fabrics to our interior decor – everything counts when creating a peaceful room…
Aside from the Scopus bass traps already discussed, all our treatments are broadband, a mix of diffusion at the point of first reflection with intertwined absorption and scattering in the rear half of the room where 50% of the panels include scatter plates.
KEF’s engineers even specified the IKEA Kallax shelving system at the rear of the room as part of the strategy. Filling the cells with random shapes, rather than packing them solid with LPs, is still a work in progress! Nevertheless, this all has a purpose – we change what’s coming back from the walls by the same amount across all frequencies, so our reflected and reverberant soundfield has the same tonal balance as the direct sound.

You must be logged in to post a comment.