Audiophilepure

Read Here

“You can turn the low pass filter on or off depending on whether you’re using the sub with a Low Frequency Effect (LFE) channel. If the low pass filter is on then you can set the frequency at which the sub crosses over with the main speakers and you can adjust the slope at which the low pass filter rolls off (the default is 12dB). There’s also a Phase control, which allows you to shift the timing of the subwoofer output to align with the main speakers or additional subwoofers, and a Polarity control that allows you to reverse the electrical polarity from positive (default) to negative if necessary. The Room Gain Compensation control allows you to adjust for excessive sound wave density in smaller rooms by reducing the bass at either -6 or -12 dB per an octave, below a frequency that is adjustable from 25 to 40 Hz. You do this by turning the room gain compensation on or off and adjusting the high pass frequency and the adjustment slope (12dB is the default setting).”

Comments are closed.