Audiophilepure

https://www.enjoythemusic.com/superioraudio/equipment/0524/Linkwitz_LX521_Loudspeaker_Review.htm

Digging into my cabinet of tweaks I came up with enough 70mm square damping feet from Soundeck to put one under each corner of the subs and at each corner of the bridges. In the photo below you can see the footer excess protruding from the sides. The thickness of the sides of the bridge is only 18mm, so there is not much material to anchor a footer unless the sides are reinforced with additional material. Each Soundeck footer, however, could be cut to create three 70mm strips to attach under the length of the sides of the bridge. Even on the soft carpeted surface, this made a noticeable improvement with virtually no increase in speaker height.

Comments are closed.